03/22/2024
This episode of Learn To Burn, Zero Tolerance tackles a common challenge in machining: burning 2 small carbide discs, resulting in a…
Watch Video
12/01/2023
In this episode of Learn to Burn, Steve shows the process of maximizing machining efficiency by leveraging tool changer and…
Watch Video
08/23/2023
In this episode of Learn to Burn, Steve highlighted the challenges he faced during a wire EDM project, where he aimed to…
Watch Video
07/28/2023
Steve from Zero Tolerance LLC focuses on the seamless blending of a feature burned using a sinker EDM on…
Watch video
04/12/2023
In today’s episode, Steve from Zero Tolerance explores how to tackle a difficult issue: machining really…
Watch video
03/29/2023
In this exciting new video, Zero Tolerance showcases their latest addition to their arsenal of…
Watch Video
01/04/2023
Fixturing is not just about identifying the best way to secure the workpiece to the machine. It’s a mindset. Here’s how Steve from Zero Tolerance LLC approaches it…
Watch Video
11/30/2022
In this episode of Learn to Burn, Steve Michon from Zero Tolerance answers that question by showing how he and his…
Watch Video
11/09/2022
It happened to all of us. You are drilling a deep hole and SNAP, the drill is broken and stuck in there. Can the part be…
Watch Video
10/14/2022
Is EDM always the best solution when machining molds? Not really. Watch as Steve Michon from Zero Tolerance showcases in which situation a 5-Axis machine tool can eliminate the need…
Watch Video
09/03/2022
Steve Michon from Zero Tolerance explains the reasons why setting up your job correctly is paramount, walks us through all the steps of a setup in detail….
Watch Video
08/10/2022
In this video both Steve and Ethan from Zero Tolerance present some of their steepest challenges and their fool proof secrets for facing challenging custom jobs…
Watch Video
07/13/2022
What do electrical discharge machining and fishing have in common? Lures! Let’s take a look at how to…
Watch Video
06/13/2022
Waste stock for save time? Steve shares perspective and tips about selecting the right fixture that has helped him build a successful EDM business…
Watch Video
04/14/2022
Is there such thing as zero tolerance? 3 levels of tolerancing and Steve’s method to all the madness will be explained in this video…
Watch Video
03/09/2022
Fast hole, wire and sinker EDM is necessary for repairs and changes on material that…
Watch Video
02/11/2022
Having worked with both copper and graphite for electrodes, Steve has discovered that graphite is better. Here’s why.
Watch Video
01/21/2022
High end copper vs high end graphite…which to use and why! Let’s compare…
Watch Video